Information
| Max. spindle speed [min⁻¹] | 20,000 |
|---|---|
| Travel distances [mm] | X: 500 Y: 300 Z: 275 A (degrees): 360 |
| Tool magazine capacity [pcs.] | 6 |
| Rapid traverse speed (XYZ axes) [min⁻¹] | 40 × 40 × 40 |
| Indexing speed [min⁻¹] | A: 100 |
| Required footprint [mm] | 998 × 1,656 (39.3 × 65.2) |
Machining processes and burrs
Optimal machine configuration Brother’s original features significantly improve deburring efficiency
Brother’s innovative deburring features significantly improve the efficiency of deburring in production runs of varying quantities, a process that is currently carried out manually.
Brother Original Deburring Setup Functions Significant reduction in set-up times for deburring; create simple machining paths in a short space of time
The machine features Brother’s original deburring functions, including simple teaching of representative points, intuitive toolpath correction, automatic generation of toolpaths and automatic conversion of machining programmes.
Rapid deburring set-up has been achieved, enabling the mechanisation of deburring in production runs of variable quantities, a process currently carried out manually.
Extensive features
| Article | Article | DG-1 Deburring Centre |
|---|---|---|
| CNC unit | CNC unit | CNC-D00 |
| Travel distance | X-axis [mm] | 500 |
| Travel distance | Y-axis [mm] | 300 |
| Travel distance | Z-axis [mm] | 275 |
| Travel distance | A-axis [degrees] | 360 |
| Travel distance | Distance between the centre of rotation of the A-axis and the spindle head [mm] | 80–355 (3.1–14.0) |
| Table | Maximum load capacity (uniform load) [kg] | 50 (110) |
| Table | Maximum table moment of inertia [kg·m² (lb·inch²)] | 0.7 (2,392) |
| spindle | Spindle speed (min⁻¹) | 1 – 20,000 |
| spindle | Tapered bore | 7/24 Pin No. 15 |
| Feed rate | Rapid traverse speed (XYZ range) [m/min (inches/min)] | 40 × 40 × 40 |
| Feed rate | Cutting feed rate [mm/min] | X, Y, Z axes: 1 – 30,000 (0.04 – 1,181) *6 |
| Feed rate | Indexing speed (A) (min⁻¹) | 100 |
| ATC unit | Tool holder type | JBS4002-15T |
| ATC unit | Tension bolt type *3 | JBS4002-15P (45°) |
| ATC unit | Tool magazine capacity [pcs.] | 20 |
| ATC unit | Max. tool length [mm] | 150 (5.9) |
| ATC unit | Max. tool diameter [mm] | 32 (1.2) |
| ATC unit | Max. tool weight *1 [kg (lbs)] | 0.4 (0.9) |
| ATC unit | Tool selection procedure | Collection method |
| Tool change time *4 | Tool-to-tool [s] | 3.0 |
| Tool change time *4 | Chip-to-chip [s] | 4.3 |
| Electric motor | Main spindle motor (continuous operation) *2 [kW] | 2.1 |
| Electric motor | Axle feed motor [kW] | X, Y, Z axes: 0.32, A axis: 0.9 |
| Power source | Power supply | 200 to 230 VAC ±10%, 3-phase, 50/60 Hz ±2% |
| Power source | Power consumption (continuous operation) [kVA] | 3.8 |
| Power source | Compressed air supply | 0.4 – 0.6 (recommended value 0.5 MPa *5) |
| Power source | Compressed air supply | 20 |
| Machine dimensions | Height [mm] | 2,033 (80.0) |
| Machine dimensions | Space required [with the control unit door open] [mm] | 998 x 1,656 [2,494] (39.3 x 65.2 [98.2]) |
| Machine dimensions | Weight [kg (lbs)] | 1,200 (2,646) |
| Standard accessories | Standard accessories | Operating instructions (1 DVD set), levelling screws (4), levelling plates (4), chip tray, top cover |
| CNC model | CNC-D00 |
|---|---|
| Steering axles | 4-axis (X, Y, Z, A) |
| Simultaneously controlled axes | -axis (4X, Y, Z, A) |
| Simultaneously controlled axes | Linear: 4-axis (X, Y, Z, A) Circular: 2-axis Spiral/conical: 3-axis (X, Y, Z) |
| Smallest input increment | 0.0001 mm, 0.00001 inch, 0.0001 degree |
| Maximum programmable dimension | ±999,999.9999 mm, ±99,999.99999 inches |
| Advertisement | 15-inch colour LCD keypad display |
| Storage capacity | 500 Mbytes, 3 Gbytes (optional) (total capacity of the programme and database) |
| External communications | USB storage interface, Ethernet |
| Number of programmes that can be stored | 4,000 (total capacity of the programme and database) |
| Programme format | NC language |
No videos available.
Adresse
Josef Binkert AG
Grabenstrasse 1
CH-8304 Wallisellen
Kontakt
Öffnungszeiten
Montag - Freitag
7.30 - 12.00 Uhr
13.00 - 17.00 Uhr