Information
| Max. spindle speed [min⁻¹] | 12,000/ (optional) 20,000/ (optional) 10,000 with high torque |
|---|---|
| Travel distances (mm) | X: 550 Y: 400 Z: 400 B (degrees): 360 |
| Tool magazine capacity [pcs.] | 30 |
| Rapid traverse speed (XYZ axes) [m/min] | 50 x 50 x 56 |
| Indexing feed rate [min⁻¹] | 100 |
| 1,557 × 2,743 [3,581] (61.3 × 108.0 [141.0]) | 1,557 × 2,743 [3,581] (61.3 × 108.0 [141.0]) |
| BT double-contact spindle (BIG-PLUS) | Optional |
| Coolant supply through the spindle (CTS) | Optional |
Features of a horizontal machining centre This highly productive horizontal machining centre enables the machining of large and long workpieces
A high-productivity horizontal machining centre with a BT30 spindle, featuring a generous clamping range, a 30-tool magazine and a high-speed B-axis table.
This enables the machining of large or long workpieces, which was not possible on conventional BT30 machines.
Productivity A tireless pursuit of high productivity through faster and optimised operation, achieved by means of integrated machine and control system development
By utilising the benefits of integrated machine and
control development – such as a spindle with rapid acceleration and deceleration, faster and optimised tool change, and an inertia estimation function – it has been possible to achieve exceptionally high productivity.
Editing options High machining performance thanks to a highly efficient spindle motor and optimal machine design
The machine is fitted with a highly efficient, high-performance spindle motor, including a newly developed standard spindle motor rated at 12,000 rpm and a newly developed, highly rigid spindle.
Thanks to the experience gained with CAE analysis technologies during the development of the SPEEDIO series, it has been possible to achieve both high spindle speed and high rigidity in the machine.
The machine is characterised by high machining performance, as it supports a 7 MPa high-pressure coolant system and is fitted with a B-axis table with high clamping torque.
Usability Fitted with the new ‘CNC-D00’ control system for improved user-friendliness. Simpler set-up and faster workpiece changes.
The apps and the vertical 15-inch LCD touchscreen enable intuitive operation.
Waste-free operation is possible in the areas of set-up, processing settings, production and the recovery process, leading to improved work efficiency and operational rates.
Usability has been enhanced by positioning the control panel on the side of the machine.
| Item | Item | H550Xd1 / H550Xd1 RD *8 |
|---|---|---|
| CNC unit | CNC unit | CNC-D00 |
| Travel distances | X-axis [mm] | 550 |
| Travel distances | Y-axis [mm] | 400 |
| Travel distances | Z-axis [mm] | 400 |
| Travel distances | B-axis [degrees] | 360 |
| Travel distances | Distance between the table top and the centre of the spindle [mm] | 100–500 |
| Travel distances | Distance between the centre of the table and the tip of the spindle [mm] | 150–550 |
| Table | Working range [mm] | 400 × 400 |
| Table | Max. load capacity [kg] | 400 |
| Table | Maximum moment of inertia of the tabletop [kg・m²] | 3.4 (11,618) [5.4 (18,453)*10] |
| spindle | Spindle speed [min⁻¹] | 12,000 min⁻¹ Specifications: 1 – 12,000 10,000 min⁻¹ high-torque Specifications (optional): 1–10,000 20,000 min⁻¹ Specifications (optional): 1 – 20,000 |
| spindle | Spindle speed during thread cutting [min⁻¹] | MAX. 6,000 |
| spindle | Tapered hole | 7/24 tapered No. 30 |
| spindle | BT double-contact spindle (BIG-PLUS) | Optional |
| spindle | Coolant supply through the spindle (CTS) | Optional |
| Feed rate | Rapid traverse speed (XYZ range) [m/min] | 50 × 56 × 56 |
| Feed rate | Cutting feed rate [mm/min] | X, Y, Z axes: 1 – 30,000 |
| Feed rate | Indexing feed rate (B) [min⁻¹] | 100 (85 × 10) |
| ATC unit | Tool shank type | MAS-BT30 |
| ATC unit | Tension bolt | MAS-P30T-2 |
| ATC unit | Tool magazine capacity [pcs.] | 30 |
| ATC unit | Max. tool length [mm] | 250 |
| ATC unit | Max. tool diameter [mm] | 125 |
| ATC unit | Max. tool weight [kg] | 4.0 / Tool, (TOTAL WEIGHT OF THE TOOL: 50 (110.2)) |
| ATC unit | Tool selection procedure | Random Abbreviation Method |
| Tool change time | Tool to tool [sec.] | 1.3 *14 |
| Tool change time | Chip to chip [sec.] | 2.7 * 14 |
| Electric motor | Main spindle motor (10 min/continuous operation) [kW] | 12,000 min⁻¹ Specifications: 10.1/7.0 10,000 min⁻¹ high-torque Specifications (optional):12.8/9.2 20,000 min⁻¹ Specifications (optional): 7.4/5.1 |
| Electric motor | Axle drive motor [kW] | XZ axis: 1.0, Y axis: 1.8, B axis: 1.8 |
| Power source | Power supply | 200 to 230 V AC ±10 per cent, 3-phase, 50/60 Hz ±2 per cent |
| Power source | Rated power (continuous operation) [kVA] | 10.4 |
| Power source | Air supply | 0.4 – 0.6 (recommended value: 0.5) |
| Power source | Air supply | 45 |
| Machine dimensions | Height [mm] | 2,497 |
| Machine dimensions | Required footprint [mm] | 1,557 × 2,743 [3,581] (61.3 × 108.0 [141.0]) |
| Machine dimensions | Weight [kg] | 2,850 |
| Accuracy | Accuracy of bidirectional axis positioning | X, Y, Z axes: 0.006–0.020 mm |
| Accuracy | Accuracy of bidirectional axis positioning | B-axis: 28 seconds or less |
| Accuracy | Repeatability of bidirectional axis positioning (ISO 230-2:2014) [mm] | X, Y and Z axes: less than 0.004 mm; B axis: 16 seconds or less |
| Standard accessories | Standard accessories | User manual (1 DVD set), levelling pins (4), levelling plates (4) |
| CNC Model | CNC-D00 |
|---|---|
| Control axis | 5 axes (X, Y, Z, 2 additional axes) |
| Simultaneously controlled axis | 5 axes (X, Y, Z, 2 additional axes) |
| Simultaneously controlled axis | Linear: 4 axes (X, Y, Z, 1 additional axis) Circular: 2 axes Helical/conical: 3 axes (X, Y, Z) |
| Smallest input increment | 0.001 mm, 0.001 degrees, 0.0001 mm, 0.0001 degrees (optional) |
| Maximum programmable dimensions | ±999,999.999 mm, ±999,999.9999 mm, (optional) |
| Advertisement | 15-inch colour LCD touchscreen |
| Storage capacity | 500 MB, 3 GB (optional) (total capacity of the programme and database) |
| External communications | USB storage interface, Ethernet, RS232C (optional) |
| Number of programmes that can be stored | 4,000 (total capacity of the programme and database) |
| Programme format | NC language*Colloquial language not available |
| Operation | Test run Machine lock Programme restart Rapid traverse Override Cutting feed override Background processing Screenshot Operating level External input signal Keys Key combinations < optional > Spindle override |
|---|---|
| Programming | Absolute / Incremental (inch / metric) Coordinate system setting Corner C / Corner R Rotational transformation Synchronised thread cutting Sub-programme Graphical display |
| Measurement | Automatic workpiece measurement; tool length measurement |
| High speed and high accuracy | Setting the machining parameters: High-precision mode AIII, high-precision mode BI (160-block look-ahead), backlash compensation, high-precision mode BII (1,000-block look-ahead, smooth path offset) |
| Monitoring | Machining load monitoring, ATC monitoring, overload prediction, curve display / curve output to memory card, automatic thermal deformation compensation (X, Y and Z axes), production output display, tool life / tool replacement, function for detecting stuck chips |
| Maintenance | Enter key Status log Alarm log Operating log Maintenance notice Measurement of motor insulation resistance Filter cleaning with detection of filter blockages Battery-free encoder Brake load test |
| Automatic / Network | Remote computer control, OPC UA, automatic notification, integrated PLC (LD/ST/FBD) < optional > CC-Link, CC-Link master station, remote device station, PROFIBUS DP, DeviceNet slave, PROFINET slave, EtherNet/IP slave |
| Energy saving | Automatic switch-off, standby mode, automatic switch-off of coolant supply, automatic switch-off of work lights, delay before switching off the chip extraction system, chip extraction system in energy-saving mode, energy-saving mode |
| Support apps | Adjust machine parameters ATC tool Tool life Waveform display Production output Energy saving/power consumption Recovery support Inspection PLC Machining support without warm-up phase Software control panel |
| Accessories | File viewer, Notepad, Calculator, Register shortcut, Display off |
| Functions limited to NC language | Menu Programming Local Coordinate System Extended Workpiece Coordinate System One-way positioning Inverse feed rate Programmable data input Tool length compensation Milling cutter compensation Scaling Mirror image External sub-programme call Macro Sequential operation / FTP download Multi-skip function < optional > Sub-micron command Macro with interruption Rotating fixture offset Setting of fixture coordinates Involute interpolation Vibration compensation |
Cars
EV gearbox housing
EV gearbox
Inverter case
Battery case
Aluminium wheel
ABS valve housing
Steering rack housing
Adresse
Josef Binkert AG
Grabenstrasse 1
CH-8304 Wallisellen
Kontakt
Öffnungszeiten
Montag - Freitag
7.30 - 12.00 Uhr
13.00 - 17.00 Uhr